tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com parameter symbol specification frequency range fo 10.0 ~ 150.0mhz ( standard range) frequency tolerance (@25c) ? f/fo 5,10,15,20,30 & 50ppm(std ) stability over temp range tc 5ppm ~ 50ppm (see table 2) temp operating range topr 0~+50c ~ -40~+85c ( see table 2) temp storage range tstg -40 ~+85c equivalent series resistance esr see table 1 load capacitance cl 10pf ~ 50pf & series shunt capacitance c0 5pf max drive level dl 0.01 ~ 100 w esr min to max <1.3 fl min to max <1.3 insulation resistance ir 500m ? min a ging fa 3ppm p/year issue 10 c1f (custom to 200w available - enquire) 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk http://www.actcrystals.com @100v dc date 18-7-2012 for quotations or further information please contact us at: in line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice condition the act630smx-4 family is a low cost,4 pad, hi g h qualit y , low a g in g 6x3.5mm smd cr y stal i n a ceramic base / metal lid package, seam welded for good long term reliability. the device has the lid grounded via the package to reduce emi issues. the wide frequency range and specification options ensure suitability for many applications. applications: wireless, audio-visual, atm,cordless phones, pagers, micro clock, notebook, instrumentation, office automation, audio-visual, process control, consumer & communications. act630smx-4 iso9001 registered specification customer to specify : frequency, frequency tolerance, temperature stability, operating temperature & load capacitance please note that all parameters can not necessarily be specified in the same device drive level dependency dld (first year max @ 25c) please specify please specify please specify please specify (16,20 & 30pf std ) please specify 0.01, 0.1,1,10,50,100 ? w steps connections #1. crystal #2. grounded to lid #3. crystal #4. grounded to lid pad surface material: gold (au) stability temp ?? available stabilities standard stabilities ?? ?? ? -40~+85c ?? -30~+80c ?? -20~+70c ?? +/- 20ppm ? -10+60c ????? +/- 30ppm +/- 50ppm 0~+50c ????? +/- 5ppm +/- 10ppm table 1 esr ( ? ) max mode / cut fundamental / at fundamental / at fundamental / at 3 rd overtone / at 3 rd overtone / at 3 rd overtone / at freq. range (mhz) 150 90.001 ~ 150.000 50 15.000 ~ 49.090 45.000 ~ 79.999 80.000 ~ 90.000 40 60 10.000 ~ 11.999 90 90 12.000 ~ 14.999 13.5 2.0 0.20.5 dimension 12.0 5.5 6.5 1 80 4.0 8.0 0.3 1. 4 0.05 178 0.1 1 bcd tolerance 0.3 0.05 0.1 0.1 0.1 tape reel ( mm ) wwow1lo l1 ho h1 a
example : cd 1200 i k g c (#) - pf 630smx-4 (12.000mhz ) (30ppm) (30ppm) (-20+70) (1k reel ) (rohs) a 5 e 10 f fundamental f 15 a 3rd overtone - pf g 20 e -10+60 h 25 -0+50 go 8 i 30 f -10+70 jo 9 l 50 g -20+70 ko 10 package w -30+65 mo 11 l = loose t -30+70 oo 12 c =1k reels h -20+85 zo 14 b 5 k -30+80 po 15 f 10 m -40+85 ro 16 g 15 to 18 i 20 v o 20 k 30 aa 24 o 50 ba 25 v 100 da 30 sr sr notes : 1) 2) 3) 4) issue 10 c1f date 18-7-2012 tighter aging may be available please enquire. leave blank for standard aging. e business centre, molly millars lane, wokingham, berkshire, rg41 2ey, united ki n http:www.actcrystals.com a guide to availability of tighter stabilities appears on page one of this data sheet in table 2 iso9001 registered for quotations or further information please contact us at: frequencies below 10.000mhz are prefixed with a "0" (eg: 0900 = 9mhz.whereas 10.000mhz is 1000 ) cd1200ikgrofc - pf 12.0000mhz tighter tolerances and stabilities and other operating temperature ranges may be available. act are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested aql requirements, non standard packaging or taping and reeling and custom marking. such devices would normally be allocated a custom specification part number which is wholly customer specific. ( eg : a 12.00mhz custom act630smx-4 device may have a part number such as cd1200c- c1122-pf) 11250= 112.500mhz nb: full example part number it is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below 0983 = 9.8304mhz stability over operating temperature (oc) 1200 = 12.000mhz 7999 = 79.9999mhz load capacitance ( pf or series resonance) mode rohs comp' examples tolerance (pm) @ 25oc frequency operating temperature range (oc) 6~9.999mhz 0 and 1st 3 digits of frequency 10- 99.9999mhz 1st four digits of frequency. 100~150 1st five digits of frequency. s4 series : act630smx-4 part numbering code is c d ro f (16pf) (fund') stability temp ?? available stabilities standard stabilities ?? ?? ? -40~+85c ?? -30~+80c ?? -20~+70c ?? +/- 20ppm ? -10+60c ????? +/- 30ppm +/- 50ppm 0~+50c ????? +/- 5ppm +/- 10ppm
|
